If we were to say which clinic is the leader in CoolSculpting in Thailand, it cannot be denied that APEX is truly a leader. With more than 11 years of providing CoolSculpting, we have the most treatment cases in Thailand and Asia.
Not only that, the CoolSculpting service team at APEX also has the largest number and is stationed at every branch of APEX, causing people to trust in our services and have been telling each other for a long time.
And most recently, Zeltiq Company, the developer of the CoolSculpting machine, has developed a new, more efficient model. It also corrects various limitations in treatment. CoolSculpting Elite was created for those who want to get in shape, receive treatment faster than before, and break down fat better than before.
CoolSculpting Elite at APEX is faster and reduces faster
CoolSculpting Elite, a new innovation in cold fat removal developed from the original CoolSculpting, took the limitations or weaknesses of the old machine to be developed to close the defect and enhance the efficiency of treatment to be better than before.
From research from people who had undergone cold lipolysis, it was found that 100% of patients who had it done, Coolsculpting Elite delivers better, faster results than ever before.
Zeltiq also addresses treatment time issues caused by machine limitations by adding additional applicator so that the patient can do multiple points at the same time. This can reduces the time by more than half and receives better treatment results than before.
The difference between CoolSculpting and CoolSculpting Elite
- The machine has a new design with 2 heads and 2 separate coolers, which are fully cooled at -11 to -13 degrees and provide a stable temperature. Can be done at multiple points at the same time.
- Head that is completely attached to the skin in the treated area. Able to suck more skin and fat into the cup than before – increasing the coolness on the skin to 96.6% compared to the original at 65.7%.
- Newly designed applicator, New Curve Series, to increase treatment efficiency and can be done in more areas of the body.
New Curve Series with new changes for better results.
Applicator Curve Series, the newest model from CoolSculpting®️ Elite, was developed to be able to remove excess fat in more areas of the body, including the abdomen, armpits, bra lines, breasts, inner thighs, knees, buttocks, arms, and under the chin. It is also designed to curve more naturally according to the body so that you can have the body shape you want with cold fat-dissolving technology. The newly developed machine head is as follows:
- Curve 80 or CoolMini: Applicator that focuses on reducing excess fat in the area under the chin, fat above the knees, or even small breast areas. APEX is the first to have Curve 80, making it possible to eliminate excess fat in these small areas.
- Curve 120: An applicator that will help reduce excess fat in areas such as the inner thighs, arms, abdomen, and sides safely and effectively.
- Curve 150: A popular applicator that experts use to reduce excess fat around the abdomen, buttocks, or bra strap area. This is an area where people like to do it most, CoolSculpting.
- Curve 240: Applicator for those who have little accumulated excess fat but still lacking confidence. This type of applicator will help you to have a more perfect figure.
- Flat 125: An applicator designed to reduce fat bulges in areas such as the inner thighs, arms, and abdomen. Uses the same suction technology as the CoolCore Advantage.
- Flat 165: For people who want to have a flat stomach. This type of applicator can help remove fat cells in the upper abdominal area and the lower part effectively.
- Surface 150: The machine head will make your proportions flawless. This type of applicator is designed to remove excess fat in areas that cannot be pinched or grabbed, such as the abdominal area and outer thigh, etc.
CoolSculpting®️ Elite from science towards reducing excess fat with greater efficiency than before.
CoolSculpting Elite, this technology for breaking down fat with cold, still using the work process of the old machine by delivering cold with precise temperature control and safety, delivering specific cold to the fat cells under the skin. This causes the fat cells that have been cooled to harden and die.
After that, the body will eliminate the remains of the fat cells according to a natural process. But what is different from the original version is that the machine head will be able to absorb more of the skin than before, making the area that receives the cold wider, thus causing more fat to be broken down.
How much does CoolSculpting®️ Elite cost?
For CoolSculpting®️ Elite, the cost will vary depending on your desired goals and the amount of making. The experts at APEX can help you create a plan that suits your goals and your desired budget.
CoolSculpting®️ Elite: Before & After
CoolSculpting Elite, do you see immediate results after doing it?
CoolSculpting is a technology for removing excess fat where you can feel the change since the first time. But you will start to see the change in shape more clearly after 1-3 months. However, the results will depend on each person, including the area where it was made.
Coolsculpting Elite, who can do it?
As well as doing CoolSculpting, for CoolSculpting Elite, it is still suitable for those who have excess fat accumulated in their body that can be clearly seen. such as;
- mothers who have just gone through childbirth
- people who exercise to build muscle but still have excess fat to get rid of unable to exercise.
Limitations on doing CoolSculpting Elite
CoolSculpting Elite has quite a few limitations because it is a method that uses cold combined with the body’s natural mechanisms. But there are important limitations as follows:
- People who are allergic to cold. You won’t be able to do it because allergic reactions may occur during the process.
- People who have surgery in the area that needs to be done Coolsculpting. You must have a period of approximately 6 months after surgery, but it can be done in other areas.
- People who have an abdominal hernia cannot do CoolSculpting in the abdominal area absolutely, but it can work in other areas as usual.
Is CoolSculpting Elite safe?
Compared to other methods of slimming, Coolsculpting Elite is a very safe cold fat-dissolving technology because there is no need for surgery.
There is no need to pierce the skin to remove fat from the body. Instead, it uses the body’s natural process to get rid of excess fat.
Because of this, it does not cause scars or fascia under the skin like liposuction that may cause more side effects.
Does CoolSculpting Elite hurt?
CoolSculpting Elite is the best answer for people who want to reduce their body size but don’t want to hurt themselves because during the procedure, there will be no pain at all. There will only be a feeling of tightness in the skin area. Therefore, no need to use anesthesia or anesthesia to suppress pain. After finishing, there is no need to recuperate and can return to work or normal activities.
CoolSculpting Elite procedure
For the steps to do CoolSculpting Elite, it is simple, and there’s no need to prepare anything before doing it. It requires you to lie still and not be able to move your body much.
This may cause the applicator to come off the skin and cause treatment to be interrupted. And here are the steps to do it, CoolSculpting Elite, you should know:
Before doing CoolSculpting Elite, an expert or Coolsculpting Specialist will come in and give advice about the procedure and explain the limitations and some prohibitions in order to have a common understanding.
- Assess the area you want to work on and what kind of applicator is suitable. This step is the duty of a Coolsculpting Specialist, who will choose the size of the applicator and design the placement of the applicator to create a beautiful shape for you.
- Attach the applicator at the area and begin the procedure. In the first 10 minutes will feel very cold in the treat area, then gradually begin to feel numb and feel constant for 35 minutes.
When the time is up, the expert will remove the applicator and massage the treated area for 2 minutes. It because of research has found that massaging immediately after treatment after finishing CoolSculpting Elite will increase the effectiveness of your treatment by up to 68%. After that, You can live your normal life. There is no need to worry about side effects at all.
CoolSculpting Elite At APEX
If you are worried about excess fat, it’s time for you to experience the process of dissolving excess fat with cold, CoolSculpting Elite. At APEX, we have a new model available in all branches and treated by the team CoolSculpting Specialist. Experience the difference with our expert team and cutting-edge technology today!
